Measuring Your Vehicle
Measuring Your Vehicle
To help us find the right Gearmate system for your vehicle, please measure your pickup bed or SUV boot using the dimensions shown below.
If you cannot find your vehicle model in our list, we may still be able to help. Please send us your measurements and a photograph of your bed liner. Our Design Team can then assess a suitable solution for your vehicle.
If you cannot provide a photograph, please call us or email sales@gearmate.co.uk .
Pickup Bed Dimensions
A — Tailgate Aperture: The narrowest opening.
B — Tailgate Width: Width at approximately 40 mm from the closed tailgate.
C — Width Between Wheel Arches: Measure the distance between the wheel arches.
D — Vehicle Width: The maximum width inside the vehicle.
E — Bed Length: Measure along the floor to the closed tailgate.
SUV Boot Dimensions
A — Boot Entry Width: Width at the entry to the boot on the floor.
B — Tie-Down Point Width: Width between tie-down points, if present.
C — Boot Depth at 300 mm: Depth from the opening to the rear of the seat at 300 mm height.
D — Boot Depth at Floor Level: Depth from the opening to the rear of the seat at floor level.
E — Distance to First Tie-Down Point: Measure from the opening to the first tie-down point, if present.
F — Distance Between Tie-Down Points: Measure between the tie-down points, if present.
Pickup Bed Dimensions — T-Slide
A — Tailgate Aperture: The narrowest opening.
B — Bed Length: Measure along the floor. Do not measure to the back wall if there is a feature in the bed liner.
C — Width Between Wheel Arches: Measure the distance between the wheel arches.
D — Tailgate to Wheel Arches: Measure at approximately 50 mm above the bed floor.
Pickup Bed Dimensions — Load Divider
A — Load Space Length: Measure along the floor from the bulkhead to the closed tailgate.
B — Height of the Load Space: Measure to the top of the tailgate.
C — Height of the Hard Top Aperture: Measure from the load bed to the maximum opening of the tailgate.
D — Interior Height of the Hard Top: Measure to the lowest central feature, such as a light.
E — Peak Hard Top Roof Length: Measure from the bulkhead to the point where the roof begins to slope down.
F — Bulkhead to Aperture Length: Measure from the bulkhead to the aperture opening measured in C.
Can't Find Your Vehicle Model?
We haven't designed brackets for every vehicle model yet, but that doesn't mean we cannot help. Send us your bed measurements and a photograph of your bed liner so our Design Team can assess a solution for your vehicle.
When placing an order, you can attach your photo at the designated area during checkout or email it to sales@gearmate.co.uk .